BMW E30 UNI JOINT (steering column linkage)
! BEFORE BUYING !
Please make sure our UJ will fit into your vehicle.
A 255 mm
A extended 295 mm
B 230 mm
B extended 273 mm
C OD 27.7 mm
D 43.2 mm
E 91.3 mm
Brand New UJ for BMW E30 steering rack & motor conversion. Connecting your steering rack and steering column
Total length measured from end to end :
CLOSED - 255 mm
OPENED - 295 mm
Total length measured from bolt hole to bolt hole
CLOSED - 230 mm
OPENED - 273 mm
Your BMW E30, E36, E46, Z3 Steering rack male shaft is always same - count spline is around 54 small tooth splines and diameter is 17.5mm
TO fit this UJ, your steering column male shaft has to be also 17.5 mm diameter BUT count spline must be around 36 tooth splines
You will be able to see the difference in count spline (between the rack and steering column) just by your eye. As long as you can see that steering column has less splines than steering rack and the diameter is same - it is all good!
12 MONTHS WARRANTY
Steering column linkage for BMW E30 conversion to BMW E36 / BMW E46 / BMW Z3 power steering rack.
Ideal for M50 / M52 engine conversion.
Perfect if you need extra header / exhaust clearance or just want to do away with the sloppy rubber bush!
Please note that some pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
If you have any questions, concerns please do not hesitate to ask.
As with any mechanical work associated with critical functions of your vehicle you make all modifications at your own risk and acknowledge that you are liable for any damages you might cause yourself. If you are not comfortable with making these modifications you should not attempt it.
THESE UNI JOINTS ARE INTENDED FOR OFF-ROAD/TRACK USE ONLY.
THEY SHOULD BE INSTALLED BY PROFESSIONALS.
- Suits steering conversion BMW E30
- BMW E30 M50 / M52 engine swap
- Extra clearance
- Performance UJ
- Brand new
- Plug & play
- 12 MONTHS WARRANTY
- NO CORE DEPOSIT
- RHD & LHD
- Product is certified by Australian Engineer